一.Product use
Buffer gas lock is widely used in power, mining, oil refining, coal and other industrial and mining enterprises bulk material loading and unloading, transportation, crushing and so on
In the important link, the bulk material falling at high speed is cushioned on the locking air plate and then decelerated through. The buffer lock can be used to contain
The dust air flow is greatly reduced, so only a single high-efficiency dust collector with a small capacity can achieve a good dust removal effect. ankyo
After the air lock is installed, the material falls on the belt very evenly, and the buffer roller on the belt can be cancelled. This product is fitted with sealed material guide groove
Combined use can prevent dust from flying. This product is installed at the end of sealing facilities such as blanking pipe and hopper.

二.Second, product characteristics
1. Protect tape, rollers, guide trough, blanking pipe, hopper and other equipment to extend their service life.
2. Make the material evenly distributed on the belt again, which can prevent the tape from running off and spreading along the way.
3. Reduce the induced blast, which can reduce the dust removal air volume to less than 1/10.
4.Can be used to transport sticky material, wet material, bulk material, to prevent the occurrence of blockage.
5.Can withstand a single weight of 80kg material,12 meters high free vertical fall of long-term impact.
6.Lock rate =90%
7.A, AB, B buffer lock is a blocking type of equipment, will not be blocked

Thumela ucingo

Mayelana nathi

Izikhokelo zomsebenzi

Thenga e waimao.163.com